Operation up to 90% Full The bowl geometry has been optimized to permit loading up to 90% full as compared to other mixers that max out at 66-75% full. Larger batches can be run in the PHARMX maximizing your capital investment.
Dome Shaped Lid
The dome shaped lid permits the material to perform a complete roll over as it moves up the side of the vessel wall. This ensures efficient mixing even when running at larger operating capacities.
Hydraulic Drive System
The hydraulic drive system permits full torque down to ¼ RPM, providing plenty of break-out torque at slow speeds for additional mixing after inspection and continuous discharging to wet milling systems.
Liftable Tool System
After the cleaning phase is complete, the liftable tool system raises the impeller 4-8” to permit inspection or swabbing of the impeller bottom, seal and bowl bottom. You do not have to manually remove the impeller using a hoist to clean or inspect!
Seal Purging System
Multi-stage seal purging system permits operating at low and high seal flows. This helps prevent dusting when loading and allows setting of the flow to match product characteristics.
Auto Cleaning System The cleaning of the mixer is executed by running a cleaning recipe that flushes/drains the seal purge system and cleans the bowl, tools and discharge. Combined with liftable tool system the cleaning of the mixer is greatly simplified.
