Fluid Air Inc. - Products: Fluid Beds - MAGNACOATER(R) - Options


Fluid Air -> Products: Fluid Beds - MAGNACOATER^® -> Options

Fluid Beds: MAGNACOATER^® - Options

	Self Clearing Spray Nozzles The self clearing nozzle has a pin that is fired when a high liquid pressure is sensed, clearing the tip of the nozzle. It is ideal for solutions that have solids which can build up in the tip.	In-Process Removable Nozzles The in-process removable nozzle can be removed during the coating process and replaced with a back up. This nozzle is ideal for solutions that tend to build up on the cap of the nozzle.
	In-Process Partition Height Adjustment A mechanical lifting device holding the partition permits raising and lowering of the partition height while processing.	Solvent Handling Custom solvent handling systems are provided to remove up to 99% of the solvent in the process. Solvent removal can be achieved via a "once through" approach where a thermal oxidizer, scrubber, carbon bed or cryogenic condenser is added to the end of the fluid bed process. If recovery of the solvent is desired, a closed loop solvent recovery package is provided that recirculates the process gas through condensers and back into the fluid bed process. Click here to download a pdf overview of solvent handling and recovery.
	Integral Scales An integral scale system permits automatic recording of the liquid addition rate.	MAGNALIFT^® Bowl Inverters Sanitary post hoist to pick up the fluid bed bowl and flip it over for discharging of product into totes, mills, screeners, etc.

i Tel: 630-665-5001 i Fax: 630-665-5981 i E-mail: fluidairinfo@spray.com i Website: www.fluidairinc.com
i All materials copyright© Spraying Systems Co. 2002 - 2010 i Legal Information i Privacy Statement