Fluid Air Inc. - Products: Fluid Beds - MAGNAFLO(R) - Options


Fluid Air -> Products: Fluid Beds - MAGNAFLO^® -> Options

Fluid Beds: MAGNAFLO^® - Options

	Vacuum Loading A vacuum loading port with or without an automated valve is added to the chamber or bowl. The control system sets the fan and inlet valves to create a vacuum which draws product into the fluid bed system.	2 Bar and 12 Bar Construction Systems are available as a 2 bar design with outdoor explosion relief venting, 2 bar design with indoor contained explosion relief venting or 12 bar design with containment.
	Automated Cleaning Custom automated WIP systems are provided that are appropriate for the product(s) being processed.	Solvent Handling Custom solvent handling systems are provided to remove up to 99% of the solvent in the process. Solvent removal can be achieved via a "once through" approach where a thermal oxidizer, scrubber, carbon bed or cryogenic condenser is added to the end of the fluid bed process. If recovery of the solvent is desired, a closed loop solvent recovery package is provided that recirculates the process gas through condensers and back into the fluid bed process. Click here to download a pdf overview of solvent handling and recovery.
	Side Discharging A port with automated valve is added to the side of the bowl to permit vacuum conveying of the processed product out of the fluid bed system.	Bottom Discharging Material can be discharged out of the bottom of the fluid bed bowl directly into a tote or other process step without opening up the fluid bed. Portable bowls also can be bottom discharged.
	MAGNALIFT^® Bowl Inverters Sanitary post hoist to pick up the fluid bed bowl and flip it over for discharging of product into totes, mills, screeners, etc.

i Tel: 630-665-5001 i Fax: 630-665-5981 i E-mail: fluidairinfo@spray.com i Website: www.fluidairinc.com
i All materials copyright© Spraying Systems Co. 2002 - 2010 i Legal Information i Privacy Statement